Current post: Selling Fluke 434 – We Buy New Used 434 (‘s) Top Dollar Paid!

Selling Fluke 434 – We Buy New Used 434 (‘s) Top Dollar Paid!

If you’re looking to Sell Fluke 434 Series II 3 Phase Power Quality Analyzer

Fluke 434 Series II Energy Analyzer
The Fluke 434 Series II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality. This energy monetization capability identifies the most energy-wasteful areas of your facility, enabling you to identify energy saving solutions. Add basic power quality measurements to the package and you’ve got yourself one powerful troubleshooting tool.

The new 430 Series II Three-Phase Power Quality and Energy Analyzers offer the best in power quality analysis and introduce, for the first time ever, the ability to monetarily quantify energy losses.The new Fluke 434, 435 and 437 Series II models help locate, predict, prevent, and troubleshoot power quality problems in three-phase and single-phase power distribution systems. Additionally, these models feature revolutionary power quality and energy measurement functions that help facilities reduce electrical power consumption, and improve the performance and lifespan of electro-mechanical equipment. Below you will find brief descriptions of these new features.

Unified power measurement
Previously, only experts could calculate how much energy was wasted due to power quality issues; utilities could calculate the cost, but the required measurement process was beyond the reach of average electricians. With the new, patented Unified Power function of the 430 Series II, you can use one handheld tool to determine how much power is being wasted, and calculate exactly what the extra consumption costs.

Fluke’s patented Unified Power Measurement System provides the most comprehensive view of power available, measuring:
Parameters of Classical Power (Steinmetz 1897) and IEEE 1459-2000
Detailed Loss Analysis
Unbalance Analysis
These UPM calculations are used to quantify the fiscal cost of energy loss caused by power quality issues. The calculations are computed, along with other facility-specific information by an Energy Loss Calculator that ultimately determines how much money a facility loses due to wasted energy.

Power inverter efficiency
Power inverters take DC current and transform it into AC current, or vice versa. Solar generation systems usually include an inverter that takes the DC energy from the solar cells and converts it to useful AC power. Inverters can lose performance over time and need to be checked. By comparing the input power with the output power you can determine the system efficiency.

Extensive data analysis possibilities
The Fluke 430 Series II analyzers provide three ways to analyze measurements. Cursors and zoom tools can be used “live’ while taking measurements, or “off line” on stored measurement data. Additionally, the stored measurements can be transferred to a PC with the included software to perform custom analysis and create reports. Measurement data can also be exported to common spreadsheet programs. Store hundreds of measurement datasets and screen captures for use in reports (depending on memory capacity).

Easy to use
Pre-programmed setups and user-friendly screens make power quality testing as simple as you would expect from Fluke. The high-resolution color screen updates every 200 ms and displays waveforms and wiring diagrams color coded to industry standards. Handy on-screen wiring diagrams for all commonly used three-phase and single-phase configurations guide you through connections.

Measures everything
Measure true-rms, peak voltage and current, frequency, dips and swells, transients, interruptions, power and power consumption, peak demand, harmonics up to the 50th, inter-harmonics, flicker, mains signaling, inrush and unbalance.

CAT IV 600 V and CAT III 1000 V safety rating
Designed to help protect you and your equipment, the Fluke 430 Series II analyzers and accessories are all certified to meet the stringent standards for use in CAT IV 600 V and CAT III 1000 V environments such as power connections and outlets throughout a low-voltage power distribution system.

Logger: record the detail you need
User-configurable, long-term recording of MIN, MAX and AVG readings for up to 150 parameters on all 4 phases. Enough memory is available to record 600 parameters for over a year with 10 second resolution, or capture smaller variations with resolution down to 0.25 seconds. The logger function is quickly accessed by the LOGGER button, the simple step-by-step setup makes capturing your important measurements as easy as can be.

Automatic transient display
Every time an event or voltage distortion is detected, the instrument triggers and automatically stores voltage and current waveforms on all three phases and neutral. The analyzer will also trigger when a certain current level is exceeded. Hundreds of dips, swells, interruptions and transients can be captured this way. You can see voltage transients as high as 6 kV and as fast as 5 microseconds.

System-monitor: summary screen of overall power quality health
The MONITOR mode delivers a dashboard display of rms voltage, harmonics, flicker, interruptions, rapid voltage changes, swells, unbalance, frequency and mains signaling.
The dashboard is updated live, showing compliance of each parameter to EN50160 limits or your own limits. Color-coded bars clearly show which parameters are inside (pass) or outside (fail) limits. During a monitor session, you can easily drill down to more detail of any parameter to view and capture its trend for a report.

Features:
Energy Loss Calculator
Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
Troubleshoot real-time
Analyze the trends using the cursors and zoom tools.
Highest safety rating in the industry
600V CAT IV/1000 V CAT III Rated for use at the service entrance.
Measure all three phases and neutral
With four flexible current probes with enhanced thin flex design to fit into the tightest places
Automatic Trending
Every measurement is always automatically recorded, without any set-up.
System-monitor
Ten power quality parameters on one screen according to EN50160 power quality standard.
Logger function
Configure for any test condition with memory for up to 600 parameters at user defined intervals
Battery life
Seven hours operating time per charge on Li-ion battery pack.

Buying, Selling, Trading Fluke 434

Applications:
Energy monetization
calculate the fiscal cost of energy waste due to poor power quality
Energy assessment
quantify the before and after installation improvements in energy consumption to justify energy saving devices
Frontline troubleshooting
quickly diagnose problems on-screen to get your operationg back online
Predictive maintenance
detect and prevent power quality issures before the cause downtime
Long-term analysis
uncover hard-to-find or intermittent issues
Load studies
verify electrical system capacity before adding loads

Energy Chart
Model
Fluke 434-II
IEC 61000-4-30 compliance
Class S
Volt Amp Hz X
Dips and swells
X
Harmonics X
Power and energy X
Energy loss calculator X
Unbalance X
Monitor X
Inrush X
Event waveform capture

Flicker
Transients
Mains signaling
Power wave
Power inverter efficiency
X
400Hz

Specifications:

Model
Measurement range
Resolution
Accuracy
Volt
Vrms (ac+dc)
434-II
1 V to 1000 V phase to neutral
0.1 V
± 0.5% of nominal voltage
Vpk

1 Vpk to 1400 Vpk
1 V
5% of nominal voltage
Voltage Crest Factor (CF)

1.0 > 2.8
0.01
± 5 %
Vrms½
434-II
1 V to 1000 V phase to neutral
0.1 V
± 1% of nominal voltage
Vfund
434-II
1 V to 1000 V phase to neutral
0.1 V
± 0.5% of nominal voltage
Amps (accuracy excluding clamp accuracy)
Amps (ac +dc)
i430-Flex 1x
5 A to 6000 A
1 A
± 0.5% ± 5 counts
i430-Flex 10x
0.5 A to 600 A
0.1 A
± 0.5% ± 5 counts
1mV/A 1x
5 A to 2000 A
1A
± 0.5% ± 5 counts
1mV/A 10x
0.5 A A to 200 A (ac only)
0.1 A
± 0.5% ± 5 counts
Apk
i430-Flex
8400 Apk
1 Arms
± 5 %
1mV/A
5500 Apk
1 Arms ± 5 %
A Crest Factor (CF)

1 to 10
0.01
± 5 %
Amps½
i430-Flex 1x
5 A to 6000 A
1 A
± 1% ± 10 counts
i430-Flex 10x
0.5 A to 600 A
0.1 A
± 1% ± 10 counts
1mV/A 1x
5 A to 2000 A
1A
± 1% ± 10 counts
1mV/A 10x
0.5 A A to 200 A (ac only)
0.1 A
± 1% ± 10 counts
Afund
i430-Flex 1x
5 A to 6000 A
1 A
± 0.5% ± 5 counts
i430-Flex 10x
0.5 A to 600 A
0.1 A
± 0.5% ± 5 counts
1 mV/A 1x
5 A to 2000 A
1A
± 0.5% ± 5 counts
1mV/A 10x
0.5 A A to 200 A (ac only)
0.1 A
± 0.5% ± 5 counts
Hz
Hz
Fluke 434 @ 50 Hz nominal
42.50 Hz to 57.50 Hz
0.01 Hz
± 0.01 Hz
Fluke 434 @ 60 Hz nominal
51.00 Hz to 69.00 Hz
0.01 Hz ± 0.01 Hz
Power
Watts (VA, var)
i430-Flex
max 6000 MW
0.1 W to 1 MW
± 1% ± 10 counts
1 mV/A
max 2000 MW
0.1 W to 1 MW
± 1% ± 10 counts
Power factor (Cos j/DPF)

0 to 1
0.001
± 0.1% @ nominal load conditions
Energy
kWh (kVAh, kvarh)
i430-Flex 10x
Depends on clamp scaling and V nominal
± 1% ± 10 counts
Energy loss
i430-Flex 10x
Depends on clamp scaling and V nominal
± 1% ± 10 counts Excluding line resistance accuracy
Harmonics
Harmonic order (n)

DC, 1 to 50 Grouping: Harmonic groups according to IEC 61000-4-7
Inter-harmonic order (n)

OFF, 1 to 50 Grouping: Harmonic and Interharmonic subgroups according to IEC 61000-4-7
Volts
%f
0.0 % to 100 %
0.1 %
± 0.1% ± n x 0.1 %
%r
0.0 % to 100 %
0.1 %
± 0.1% ± n x 0.4 %
Absolute
0.0 to 1000 V
0.1 V
± 5% *
THD
0.0 % to 100 %
0.1 %
± 2.5 %
Amps
%f
0.0 % to 100 %
0.1 %
± 0.1% ± n x 0.1%
%r
0.0 % to 100 %
0.1 %
± 0.1% ± n x 0.4 %
Absolute
0.0 to 600 A
0.1 A
± 5% ± 5 counts
THD
0.0 % to 100 %
0.1 %
± 2.5 %
Watts
%f or %r
0.0 % to 100 %
0.1 %
± n x 2%
Absolute
Depends on clamp scaling and V nominal

± 5% ± n x 2 % ± 10 counts
THD
0.0 % to 100 %
0.1 %
± 5 %
Phase Angle

-360° to +0°

± n x 1°
Flicker
Plt, Pst, Pst(1min) Pinst

0.00 to 20.00
0.01
± 5 %
Unbalance
Volts
%
0.0 % to 20.0 %
0.1 %
± 0.1 %
Amps
%
0.0 % to 20.0 %
0.1 % ± 1 %
Mains signaling
Threshold levels

Threshold, limits and signaling duration is programable for two signaling frequencies


Signaling frequency

60 Hz to 3000 Hz
0.1 Hz

Relative V%

0 % to 100 %
0.10 %
± 0.4 %
Absolute V3s (3 second avg.)

0.0 V to 1000 V
0.1 V
± 5 % of nominal voltage
General
Case
Design Rugged, shock proof with integrated protective holster Drip and dust proof IP51 according to IEC60529 when used in tilt stand position Shock and vibration Shock 30 g, vibration: 3 g sinusoid, random 0.03 g 2 /Hz according to MIL-PRF-28800F Class 2
Display
Brightness: 200 cd/m 2 typ. using power adapter, 90 cd/m 2 typical using battery power Size: 127 mm x 88 mm (153 mm/6.0 in diagonal) LCD Resolution: 320 x 240 pixels Contrast and brightness: user-adjustable, temperature compensated
Memory
8GB SD card (SDHC compliant, FAT32 formatted) standard, upto 32GB optionally Screen save and multiple data memories for storing data including recordings (dependent on memory size)
Real-time Clock
Time and date stamp for Trend mode, Transient display, System Monitor and event capture
Environmental
Operating temperature
0 °C ~ +40 °C; +40 °C ~ +50 °C excl. battery
Storage temperature
-20 °C ~ +60 °C
Humidity
+10 °C ~ +30 °C: 95% RH non-condensing
+30 °C ~ +40 °C: 75% RH non-condensing
+40 °C ~ +50 °C: 45% RH non-condensing
Maximum operating altitude
Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V
Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V
Maximum storage altitude 12 km (40,000 ft)
Electro-Magnetic-Compatibility (EMC)
EN 61326 (2005-12) for emission and immunity
Interfaces
mini-USB-B, Isolated USB port for PC connectivity SD card slot accessible behind instrument battery

If you’re selling your Fluke 434 please fill out form on the right hand side of page.